Do you know the details of wiring harness

There are often some undesirable factors in the wiring harness of terminal connection, and the main reason for these factors is that the processing details are not properly handled. Given this problem, the main article of this article is to share details of electronic wiring harness processing skills with everyone.
The detailed skills of electronic wiring harness processing are as follows:
1. The tinning process of electronic wiring harness needs to be well controlled. After stripping the wire, once the wire is stained with tin, the heating time may cause the PVC to shrink due to heat. Therefore, it is necessary to control the tinning time.
Long term, ensure evenly immersed tin can and completely covered.
2. When placing the electronic wiring harness on the plastic shell, please pay attention to the PIN removal of the terminal. This is because sometimes the PIN of the terminal will be disconnected from the plastic shell. As a result, during the electronic wiring harness process, it must be pulled back each time it is inserted into the hole to ensure that each terminal through the rubber box sticks out.
3. After crimping, the electronic wiring harness must be ensured to meet the tension. If the tension after crimping does not meet the standard, it is necessary to check whether the crimp scale of the terminal and wire is appropriate, whether the raw material of the die blade and its structural planning is reasonable, whether the raw material of the terminal is qualified, and so on.以上翻译结果来自有道神经网络翻译（YNMT）· 通用场景