What are the precautions for the installation of wiring harness processing?

Wiring harness processing is to control the operation of electrical appliances inside the car, we must be careful about its installation, because a little mistake will affect the use of electrical products, so what aspects should be paid attention to wiring harness processing?
1. Wiring harness installation should pay attention to the reasonable layout, must be more specific situation inside the car, and wiring harness needs to have enough and reasonable fixed way.

2. Wiring harness layout, must pay attention to the appearance of neat, and need to be arranged into a bundle, but also need to be arranged along the side and empty slot,

3. When the arrangement of wiring harness is on the projection direction, it should be arranged in a horizontal and vertical way, and the layout of diagonal lines should be avoided.

4. In the arrangement of automobile wiring harness, to avoid the interference of the surrounding parts, the gap between the moving parts should be greater than 25mm, the gap between the exhaust manifold should be greater than 50mm, etc.

5. Wiring harness layout should mainly prevent electromagnetic interference, so as not to affect the normal work of electrical appliances.

6. When installing the wiring harness, do not pull the harness too tight,

7. After the layout, but also check whether there is no other parts so pressed, and there should be enough space around,

8. Do not arrange wiring harnesses of the same model and color near the location, so as not to insert by mistake.

9. In order to take into account the convenience of daily maintenance, but also to reserve a certain length.